Fink

Il progetto Fink vuole portare il mondo del software Unix Open Source su Darwin e Mac OS X. Noi modifichiamo software Unix in modo che si compili e che funzioni su Mac OS X (questa procedura è chiamata "port")e lo rendiamo disponibile per aggiornamenti. Fink usa gli strumenti Debian come dpkg e apt-get per avere una potente gestione dei pacchetti binari. Potete usare lo strumento che preferite per scaricare i pacchetti precompilati o il codice sorgente da compilare. Più informazioni...

 Notizie

2021-03-06: fink-0.45.3 released-

The Fink Project has released fink-0.45.3. This is a minor behavioral fix for an issue introduced in 0.45.2. With this release, the default prefix for new installs is reverted to /sw for all macOS versions from 10.14 and earlier. Newer releases still default to /opt/sw. This will allow installs on macOS 10.14 and earlier to continue to use any available binary distributions. There are no other functional changes in this release compared to fink-0.45.2.

This release does not yet support macOS 11 (Big Sur).

2020-10-02: fink-0.45.2 released-

The Fink Project has released fink-0.45.2. This release provides support for all macOS releases up to and including 10.15.7. Most importantly, it changes the default install path location to /opt/sw for all supported macOS releases. This release also fixes bootstrapping problems when installing on macOS 10.15 with Xcode12. Run fink selfupdate to install the latest version. This release does not need any special preparation apart from those listed below if upgrading to macOS 10.15 from an earlier macOS release.

This release does not yet support macOS 11 (Big Sur).

2020-03-28: fink-0.45.1 released-

The Fink Project has released fink-0.45.1. This release provides support for all macOS releases up to and including 10.15.4, as well as support for users running the zsh shell. Run fink selfupdate to install the latest version. This release does not need any special preparation apart from those listed below if upgrading to macOS 10.15 from an earlier macOS release.

   

 Recent Package Updates

2021-05-16: frotz-2.53-1 (Interpreter for all Infocom-type games)
2021-05-16: expect-pm5162-1.35-1 (Automate human interaction with perl)
2021-05-16: io-compress-lzf-pm5182-2.101-1 (Read/write lzf files & buffers)
2021-05-16: io-tee-pm-0.66-2 (Perl module, multiplex output)
2021-05-16: compress-raw-lzma-pm5184-2.101-1 (Low-Level Interface to lzma compression lib)
2021-05-16: expect-pm5282-1.35-1 (Automate human interaction with perl)
2021-05-16: io-interactive-pm5162-1.023-1 (Utilities for interactive I/O)
2021-05-16: io-compress-lzop-pm5162-2.101-1 (Read/write lzop files & buffers)
2021-05-16: file-sync-pm5282-0.11-13 (Perl fsync and sync implementation)
2021-05-16: interpolation-pm5282-0.74-2 (Arbitrary string interpolation semantic)
2021-05-16: dbi-shell-pm5162-11.97-1 (Perl module, interactive shell for the DBI)
2021-05-16: text-diff-html-pm5162-0.08-1 (XHTML format for Text::Diff::Unified)
2021-05-16: io-stty-pm-0.04-1 (Set terminal parameters with perl)
2021-05-16: set-object-pm5184-1.41-1 (Perl module, set of objects)
2021-05-16: io-compress-pm5282-2.102-1 (Reading and writing of compressed data)
2021-05-16: devel-smallprof-pm-2.02-12 (Per-line Perl profiler)
2021-05-16: time-epoch-pm-0.02-2 (Perl Module - convert between time epochs)
2021-05-16: io-tty-pm5182-1.16-1 (Low-level allocate a pseudo-TTY)
2021-05-16: expect-simple-pm5282-0.04-1 (Simple module for automating interaction)
2021-05-16: expect-pm5184-1.35-1 (Automate human interaction with perl)
2021-05-16: class-accessor-assert-pm-1.41-2 (Perl module, accessors with type-checking)
more...

Stato

Fink currently supports macOS 10.15 (Catalina), macOS 10.14 (Mojave), macOS 10.13 (High Sierra), macOS 10.12 (Sierra), OS X 10.11 (El Capitan), OS X 10.10 (Yosemite), OS X 10.9 (Mavericks), and continues to run on older versions of OS X, although official updates are no longer available for the older versions. Installation instructions can be found on our source release page.

Xcode must be installed before Fink.

10.15 Support: 10.15 users must install Xcode version 10.3 or later (via a free download from the AppStore, or must at least install the Command Line Tools for Xcode 10.3 (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.11 or later from Xquartz.org.

10.13 and 10.14 Support: 10.13 and 10.14 users must install Xcode version 10.1 or later (via a free download from the AppStore, or must at least install the Command Line Tools for Xcode 10.1 (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.11 or later from Xquartz.org.

10.12 Support: 10.12 users must install Xcode version 8.0 or later (via a free download from the AppStore, or must at least install the Command Line Tools for Xcode 6.0 for Sierra (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.7 or later from macosforge.org.

10.11 Support: 10.11 users must install Xcode version 7.0 or later (via a free download from the AppStore, or must at least install the Command Line Tools for Xcode 7.0 for El Capitan (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.7 or later from macosforge.org.

10.10 Support: 10.10 users must install Xcode version 6.0 or later (via a free download from the AppStore, or must at least install the Command Line Tools for Xcode 6.0 for Yosemite (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.7 or later from macosforge.org.

10.9 Support: 10.9 users must install Xcode version 5.0.1 or later (via a free download from the AppStore; version 5.0.2 is recommended), or must at least install the Command Line Tools for Xcode 5.0 for Mavericks (installable via xcode-select --install, or downloadable from Apple).

If you need X11 you should install Xquartz-2.7.4 or later from macosforge.org.

10.8 Support: 10.8 users must install Xcode version 4.4 or later (via a free download from the AppStore; version 5.0.2 is recommended), or must at least install the Command Line Tools for Xcode 4.4 for Mountain Lion (downloadable from Apple or installable via the Xcode Preferences). Note that if you had an earlier version of Xcode than 4.3 installed prior to updating from 10.7, you need to uninstall the old version first by running /Developer/Library/uninstall-devtools. You can determine your current version of Xcode by running xcodebuild -version .

If you need X11 you should install Xquartz-2.7.2 or later from macosforge.org.

10.7 Support: 10.7 users must install or update Xcode to version 4.1 or later (via a free download from the AppStore), (version 4.6.3 is recommended) or must at least install the Command Line Tools for Xcode 4.3 or later (downloadable from Apple or installable via the Xcode Preferences (4.3 or later). Follow the instructions in the 10.8 section above regarding how to check your version and uninstall an outdated one, if needed.

We don't support Xquartz on 10.7, so don't remove Apple's official X11.

10.6 Support: For best results, 10.6 users are encouraged to upgrade Xcode to version 3.2.6, or to version 4.2.1 if you paid for a 4.x Developer preview. Version 4.0.2 is known to have some bugs in its linker that prevent certain packages from building. Follow the instructions in the 10.8 section above regarding how to check your version and uninstall it, if needed.

We don't support Xquartz on 10.6, so don't remove Apple's official X11.

   

Risorse

Se sei in cerca di supporto, guarda pagine di aiuto. Questa pagina comprende anche opzioni per aiutare il progetto e inviare un commento.

Il progetto Fink è ospitato da SourceForge. Oltre che ad ospitare il sito e i downloads, SourceForge mette a disposizione le seguenti risorse per il progetto:

The Fink project is hosted by SourceForge. In addition to hosting this site and the downloads, SourceForge and GitHub provide the following resources for the project:

Per favore ricorda che per usufruire di queste risorse (es., segnalare un bug o richiedere un nuovo pacchetto Fink), dovrai essere registrato con un SourceForge account. Se non ne hai uno, puoi iscriverti gratuitamente su SourceForge web site.

Additional resources hosted outside SourceForge include: